Control Panel

Training Levels

Essentials Training

Electrical Infrastructure Essentials

Training Delivery Method: Online
Estimated Completion Time: 30 Minutes
Available Languages: English, Spanish

Intended for Panduit sales professionals. This self-paced training takes you through the essentials of electrical infrastructure. Your successful completion of this course is meant to level set your electrical knowledge when engaging the electrical infrastructure market as a Panduit representative.

Launch Course ❯

Back to Top ↑

Product Training

Cable Accessory Products Course (Learning Module Series)

Training Delivery Method: Online
Estimated Completion Time: 25 Minutes
Available Languages: English

This Cable Accessory Products Course contains a series of short, on-demand learning modules covering Panduit's line of cable accessories. Each module can be accessed individually at any time. All modules must be finished in order to successfully complete the Cable Accessory Products Course.

Launch Course ❯

Cable Tie Products Course (Learning Module Series)

Training Delivery Method: Online
Estimated Completion Time: 35 Minutes
Available Languages: English, Spanish

This Cable Tie Products Course contains a series of short, on-demand learning modules covering Panduit's line of cable tie products and tooling. Each module can be accessed individually at any time. All modules must be finished in order to successfully complete the Cable Tie Products Course.

Launch Course ❯

Data Access Port Products (Learning Module Series)

Training Delivery Method: Online
Estimated Completion Time: 20 Minutes
Available Languages: English

This Data Access Port Products Course contains a series of short, on-demand learning modules covering Panduit's line of data access ports. Each module can be accessed individually at any time. All modules must be finished in order to successfully complete the Data Access Port Products Course.

Launch Course ❯

Identification and Labeling Products Course (Learning Module Series)

Training Delivery Method: Online
Estimated Completion Time: 30 Minutes
Available Languages: English

This Identification and Labeling Products Course contains a series of short, on-demand learning modules covering Panduit's line of ID and labeling products. Each module can be accessed individually at any time. All modules must be finished in order to successfully complete the Identification and Labeling Products Course.

Launch Course ❯

Abrasion Protection Products Course (Learning Module Series)

Training Delivery Method: Online
Estimated Completion Time: 25 Minutes
Available Languages: English, Spanish

This Abrasion Protection Products Course contains a series of short, on-demand learning modules covering Abrasion Protection products. Each module can be accessed individually at any time. All modules must be finished in order to successfully complete the Abrasion Protection Products Course.

Launch Course ❯

Grounding and Bonding Products (Learning Module Series)

Training Delivery Method: Online
Estimated Completion Time: 15 Minutes
Available Languages: English

This Grounding and Bonding Products Course contains a series of short, on-demand learning modules covering Panduit's Grounding and Bonding product line. Each module can be accessed individually at any time. All modules must be finished in order to successfully complete the Grounding and Bonding Products Course.

Launch Course ❯

Power Connector Products (Learning Module Series)

Training Delivery Method: Online
Estimated Completion Time: 15 Minutes
Available Languages: English

This Power Connector Products Course contains a series of short, on-demand learning modules covering Panduit's Power Connector product line. Each module can be accessed individually at any time. All modules must be finished in order to successfully complete the Power Connector Products Course.

Launch Course ❯

Terminal Products Course (Learning Module Series)

Training Delivery Method: Online
Estimated Completion Time: 20 Minutes
Available Languages: English

This Terminal Products Course contains a series of short, on-demand learning modules covering StrongHold™ products. Each module can be accessed individually at any time. All modules must be finished in order to successfully complete the  StrongHold™ Products Course.

Launch Course ❯

VeriSafe™ Products Course (Learning Module Series)

Training Delivery Method: Online
Estimated Completion Time: 25 Minutes
Available Languages: English 

This VeriSafe™ Products Course contains a series of short, on-demand learning modules covering Panduit's VeriSafe™ product line. Each module can be accessed individually at any time. All modules must be finished in order to successfully complete the  VeriSafe™ Products Course.

Launch Course ❯

Wiring Duct Products (Learning Module Series)

Training Delivery Method: Online
Estimated Completion Time: 20 Minutes
Available Languages: English

This Wiring Duct Products Course contains a series of short, on-demand learning modules covering Wiring Duct products. Each module can be accessed individually at any time. All modules must be finished in order to successfully complete the  Wiring Duct Products Course.

Launch Course ❯

Panduit IndustrialNet Copper Cable Offering

Training Delivery Method: Online
Estimated Completion Time: 5 Minutes
Available Languages: English

This course is designed for Panduit salespeople, distributor, and rep firms desiring to learn detailed information about Panduit's IndustrialNet copper cable offering.  Topics covered will range from high level technical information, sales differentiators, vertical markets and ordering information.  This is a course for a student who truly wishes to differentiate themselves as a top Panduit sales rep.

Launch Course ❯

Back to Top ↑

Solutions Training

Panduit's OEM Solutions Course (Learning Module Series)

Training Delivery Method: Online
Estimated Completion Time: 15 Minutes
Available Languages: English

Intended for Panduit sales professionals, the Panduit's OEM Solutions (Learning Module Series) is a self-paced training taking learners through the focused OEM applications to which Panduit contributes our solutions. Successful completion of this course is meant to level-set knowledge when engaging the OEM market as a Panduit representative. 

Course topics include common customer needs within the OEM applications,  OEM customer personas and their business needs/drivers, OEM target markets, and overall value propositions of our OEM solutions.

Each module can be accessed individually at any time. All modules must be finished in order to successfully complete the Panduit's OEM Solutions (Learning Module Series) Course.

Launch Course ❯

Control Panel Optimization

Training Delivery Method: Online
Estimated Completion Time: 30 Minutes
Available Languages: English, Spanish

This course discusses problems that electrical noise creates in the control enclosure, design techniques that can be applied to the layout of the control enclosure, and Panduit products that can mitigate the noise and optimize the space in the enclosure.

Launch Course ❯

UL 508A Panel Design Fundamentals

Training Delivery Method: Online
Estimated Completion Time: 40 Minutes
Available Languages: English

This exclusive training offers you an overview of how implementation of Panduit’s control panel products and solutions promote/ensure UL 508A standards compliance in end user applications.

Upon successful completion of this course, you should be able to:

• Summarize the UL 508A Standard for Industrial Control Panels
• Identify specific products that contribute to a panel’s compliance with UL 508A
• Describe how Panduit’s overall Control Panel Solution aids in compliance with the requirements of UL 508A

Launch Course ❯

Back to Top ↑

Lunch and Learn

UL 508A Panel Design Fundamentals

Training Delivery Method: Instructor Led Training
Estimated Completion Time: 90 Minutes
Available Languages: English

This course offers an overview of Panduit products and solutions that can be implemented into a control panel to promote/ensure UL 508A standards compliance in end user applications. The course includes a summary of the UL 508A standard and provides product recommendations for compliance with various sections of the standard. Covered topics include grounding and bonding, enclosure openings, field and in-panel wiring methods, marking and labeling, cable routing, and industrial Ethernet.

Request Training ❯

Success Depends on the Crimp

Training Delivery Method: Instructor Led Training
Estimated Completion Time: 90 Minutes
Available Languages: English

This value-added training is delivered by a Panduit representative at end user locations. Hands-on demonstrations and exercises provide technicians with the skills they need to produce high-quality crimps. There are three available training paths: 1) Introduction to Terminals and Power Connector Crimping, 2) Power and Grounding Connector Crimp Training, and 3) Terminal and Ferrule Crimp Training.

Request Training ❯

Back to Top ↑